Atosa MSF8304GR 72″ 3-Door Sandwich / Salad Prep Table$3,140.00
Atosa MSF8303GR 60″ 2-Door Sandwich / Salad Prep Refrigerator$2,652.00
Atosa MSF8308GR 72″ Mega Top Sandwich / Salad Prep…$3,384.00
Atosa MGF24FGR 24″ Undercounter Freezer, 4.8 cu. ft.
Hoshizaki KM-116BAJ 125 lb Crescent Cube Ice Maker with…$3,025.00
Klinger’s Trading IC1848 Ice Storage Bin 48″W X 18″D…
Klinger’s Trading IC1824-CP Underbar Ice Chest with 7-Circuit Cold…
Klinger’s Trading IC1824 24″ x 18″ Underbar Ice Bin…
Winco BTW-30 White Bar Towel, 16 x 19 in.…$23.82
Winco GHC-24 24″ Single-Channel Wire Glass Hanger Rack$19.79
Winco CO-301 Stainless Steel Flat Bottle Opener, 7″$18.04
Krowne KR-2T36-L Royal Series 2-Tier Countertop LED Lighted Liquor…
Winco GHC-24 24″ Single-Channel Wire Glass Hanger Rack$19.79
Klinger’s Trading MCS2424 Wall-Mounted Microwave Shelf – 24 x…
Klinger’s Trading SC60 60 Inch Ceiling-Mounted Pot Rack with…
Klinger’s Trading SC36 36 Inch Ceiling-Mounted Pot Rack with…
Best for high-volume bars, breweries, and restaurants that need two half-barrel kegs on tap. The Atosa MKC58GR is a 58″ direct draw keg cooler with 17.3 cu. ft. capacity, dual stainless-steel tap towers, and an R290 Embraco compressor that holds a steady 35°F to 38°F for cold, consistent pours.
Dual-tower direct draw keg cooler
Two kegs on tap, ice-cold pours all shift long
The Atosa MKC58GR pairs 17.3 cu. ft. of keg storage with two stainless-steel tap towers and a heavy-duty R290 Embraco compressor, holding a steady 35°F to 38°F so every glass pours clean and cold.
Bars, pubs, breweries, and restaurants that pour high volumes of draft beer and want two half-barrel kegs served from a single back-bar unit.
| Capacity | 17.3 cu. ft. · holds (2) half-barrel kegs |
|---|---|
| Exterior (W x D x H) | 57.8″ x 28.1″ x 55.6″ overall (cabinet 40.1″ H, towers add height) |
| Tap towers | (2) dual-faucet stainless-steel towers |
| Doors | (2) solid swing doors, locking |
| Material | Stainless steel exterior and interior |
| Temperature range | 35°F – 38°F, digital electronic controller |
|---|---|
| Compressor | 1/7 HP heavy-duty Embraco, side-mounted slide-out |
| Refrigerant | R290 (eco-friendly) |
| Electrical | 115V / 60Hz / 1Ph, 2.3 amps |
|---|---|
| Plug | NEMA 5-15P |
| Weight | 209 lb net / 243 lb gross |
| Certifications | ETL Listed (UL 471, CSA C22.2 No.120); NSF-approved magnetic door gaskets |
|---|---|
| Warranty | 2 years parts & labor / 5 years compressor |
It holds two half-barrel kegs and serves them through two dual-faucet stainless-steel tap towers, so you can run two different beers or drain one keg faster during a busy shift.
A digital electronic controller holds the cabinet between 35°F and 38°F, the recommended range for cold, consistent draft pours.
It uses a 1/7 HP heavy-duty Embraco compressor with eco-friendly R290 refrigerant. The side-mounted compressor slides out for easy maintenance.
The MKC58GR runs on a standard 115V / 60Hz / single-phase circuit, draws 2.3 amps, and plugs into a NEMA 5-15P outlet.
Yes. It is ETL Listed to UL 471 and CSA C22.2 No.120, and the magnetic door gaskets are NSF approved. It also includes locking doors, recessed handles, LED interior lighting, and pre-installed casters.
We ship the MKC58GR fast, nationwide, covered by our best price guarantee. Garland-area customers can also pick up at our showroom.
| Weight | 243 lbs |
|---|---|
| Dimensions | 28.1 × 57.8 × 55.6 in |
| Model | MKC58GR |
| Product Type | Direct Draw Keg Cooler / Beer Dispenser |
| Capacity | 17.3 cu. ft. (holds 2 half-barrel kegs) |
| Tap Towers | (2) dual-faucet stainless-steel towers |
| Doors | (2) solid swing doors, locking |
| Door Features | Magnetic gaskets, recessed handles, locks |
| Material | Stainless Steel (interior & exterior) |
| Temperature Range | 35°F – 38°F |
| Temperature Control | Digital electronic controller |
| Compressor | 1/7 HP Embraco, side-mounted slide-out |
| Refrigerant | R290 (eco-friendly) |
| Lighting | LED interior lighting |
| Mobility | Pre-installed casters (2 with brakes) |
| Dimensions (W x D x H) | 57.8" x 28.1" x 55.6" overall (cabinet 40.1" H) |
| Electrical | 115V / 60Hz / 1Ph, 2.3 amps |
| Plug Type | NEMA 5-15P |
| Weight | 209 lb net / 243 lb gross |
| Certifications | ETL Listed (UL 471, CSA C22.2 No.120); NSF-approved gaskets |
| Warranty | 2 Years Parts & Labor / 5 Years Compressor |
| Brand | Atosa |
| Manufacturer | Atosa |
Shipping. Shipped nationwide; freight is calculated at checkout based on your location. Most in-stock equipment leaves our Garland, TX warehouse within 1–2 business days.
Returns. New, unused items can be returned. See our Returns & Refunds policy for full details.
Need it custom? Our Dallas shop fabricates custom stainless and full kitchens. Request a quote.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.